Loading...
Serving Temecula, CA and surrounding areas. (951) 466-2055
Cars move too fast through driveways and community roads when there is nothing to stop them. A professionally installed asphalt speed bump solves that problem the same day - no signs, no rules, no reminders needed.
Speed bump installation in Temecula, CA means a paving crew builds a raised ridge of hot-mix asphalt directly into your existing paved surface, compacts it in layers to a consistent height, tapers the edges smoothly, and applies yellow or white paint markings for visibility - most single-bump jobs are complete in a few hours, with normal traffic restored the same day. The finished bump is permanent, durable, and does its job automatically without any ongoing enforcement.
Speed bumps are most often installed on private property - HOA community roads, apartment complex driveways, long private driveways, and parking lots. They are rarely placed on public city streets, which require a separate city approval process. If your surface is on private land, the decision is largely yours to make, with your HOA board if applicable. Temecula has a high concentration of planned communities where HOA approval is part of the process, and we are familiar with what those boards typically need. If your parking lot or pavement needs broader attention, this kind of work fits naturally alongside asphalt sealcoating or a full parking lot paving project.
Temecula Asphalt Paving has been doing paving and surface improvement work across Temecula since 2019. We build speed bumps the right way for Southern California conditions - using a mix and compaction method suited to the heat, so your bump holds its shape through summer and lasts for years.
You have noticed cars cutting through your HOA street, apartment complex, or long private driveway at speeds that feel unsafe. Speed bumps are one of the most effective physical tools for slowing traffic without requiring ongoing enforcement from a person or a sign.
Your neighborhood has kids who play outside, or your driveway or private road sees dogs and pedestrians regularly. A speed bump creates a built-in pause point that gives people and animals a safer margin every time a vehicle passes through.
Residents or tenants have raised concerns about speeding, and the board or management team is looking for a lasting solution. Installing speed bumps is a concrete, visible response that shows the community is being actively managed.
You are adding or upgrading a parking lot on your property and want to build traffic calming into the design from the start. Doing it during a paving or repaving project is the most cost-effective time, since the contractor is already on site.
We install asphalt speed bumps on residential driveways, private roads, HOA community streets, and commercial parking lots throughout Temecula and the surrounding valley. Every installation starts with preparing the existing pavement surface - cleaning, checking condition, and confirming the slope so drainage is not blocked or worsened by the bump. We then build up the bump using hot-mix asphalt in layers, compacting each pass thoroughly so the finished product has consistent height and a firm bond to the surrounding pavement. The edges are tapered so vehicles transition smoothly, and yellow or white paint markings are applied once the asphalt has cured. We include striping as part of the standard scope of work - not as an optional add-on. For properties where the surrounding pavement also needs attention, we can roll speed bump installation into a broader asphalt sealcoating or parking lot paving project so everything is handled in one visit.
Placement matters as much as the bump itself. We walk the site with you and recommend spacing based on how much distance a vehicle needs to accelerate between bumps, where pedestrian crossings occur, and whether any drainage or slope considerations affect where the bump should land. A single well-placed bump handles many residential situations. A longer private road typically benefits from multiple bumps spaced at regular intervals. We give you an honest recommendation based on your specific property - not a sales pitch for more work than you need.
For homeowners with long driveways or shared private drives where vehicle speed is a consistent concern - one or two bumps placed at the right point.
For planned communities seeking board-approved traffic calming on privately maintained streets - we provide documentation to support the HOA approval process.
For commercial or multi-family properties with internal traffic flow that needs slowing - bumps placed at lot entries, pedestrian crossings, or end-of-row transitions.
For longer private roads or driveways requiring multiple bumps spaced at effective intervals - coordinated installation so the crew handles the full route in one mobilization.
Temecula sits in the Inland Empire and regularly sees summer temperatures above 100 degrees. Extreme heat can soften asphalt, and a speed bump that was not compacted thoroughly or built with the right mix for hot climates may deform under repeated vehicle loads during peak summer months. A contractor with experience in Southern California knows to use a mix and compaction method suited to these conditions - that is not something you want to discover matters after the first heat wave. For guidance on asphalt materials and specifications, the National Asphalt Pavement Association publishes standards and best practices that reputable contractors follow.
Temecula also has a high concentration of HOA-governed planned communities - Redhawk, Harveston, Wolf Creek, and Paloma del Sol are well-known examples - and most residential speed bump requests in these neighborhoods require written board approval before work begins. We work in these communities regularly and understand what documentation the HOA board typically needs to move an application forward. Customers in Murrieta and Menifee face the same HOA landscape, and we bring the same familiarity with the approval process to every community we work in.
Describe your situation - the type of surface, how many bumps you are thinking about, and where they would go. We reply within one business day and schedule a site visit. No commitment required at this stage.
We walk the property with you, measure the surface width, check the condition of the existing pavement, and note any drainage or slope considerations. You get a written estimate that covers bump dimensions, materials, striping, and total cost before any work is scheduled.
If your property is in an HOA community, we provide a written project description or site diagram to support your board application. HOA timelines vary from a few days to several weeks - we factor this into your project schedule so there are no surprises.
The crew arrives with hot-mix asphalt and compaction equipment, preps the surface, builds the bump in layers, and tapers the edges. In Temecula's warm climate the asphalt firms up quickly, and paint markings are applied the same day. Most properties have normal traffic flowing again by evening.
We walk the property with you, answer your HOA questions, and give you a written quote with no pressure.
(951) 466-2055We have been working in Temecula and the Inland Empire since 2019 and we use hot-mix asphalt formulated for high-temperature conditions. Our compaction process ensures the bump holds its shape through triple-digit summer heat - not just the day it is installed.
Yellow and white diagonal markings are a safety expectation on most private roads and parking areas - and many HOAs require them. We include striping as part of every speed bump installation, not as a separate line item you discover later.
We have navigated the HOA approval process in Temecula's planned communities and know what documentation boards typically need. We can provide a written project description or simple site diagram to help your application move forward without delays.
California requires paving contractors to hold a state-issued license for work above a minimum project value. You can verify any contractor's license number through the California Contractors State License Board at cslb.ca.gov before signing anything.
A speed bump is one of the simplest, most effective safety improvements you can make to a private road or driveway - and when it is built right, it requires almost no attention for years. That is the outcome we aim for on every installation.
Protect your pavement and your new speed bump from Temecula's intense UV exposure with a periodic sealcoat application.
Learn MoreFull parking lot paving and repaving for commercial and multi-family properties - speed bumps can be built in as part of the same project.
Learn MoreMost installations are complete in a single day - call now or request a free estimate and we will be in touch within one business day.